Porsche Turbo 2007 Driver Manual Download Page 119

Page: 119 / 347

118

Multi-Purpose Display and Instruments

Presetting speed

You can define a speed limit in the menu

MPH-LIMIT.

Activating or deactivating the speed limit

Example: Check side lights warning message

Displaying warning messages

All current warnings and information relating to the

traffic safety of the vehicle can be displayed in the

menu WARNINGS.

Caution!

Warning messages indicate possible faults.

Consult a qualified specialist workshop. We

recommend that you use a Porsche partner for

this work since these are staffed with trained

personnel and have the necessary parts and

tools.

MAIN MENU

> MPH-LIMIT

Select and confirm

Select MPH SET.

Set desired limit:

– Press briefly:

Limit is set in increments of 1 mph.

– Press for longer than 2 seconds:

Limit is set in increments of 10 mph.

Confirm selection.

LIMIT ACTIVE is activated automatically.

MAIN MENU

> MPH-LIMIT

Select and confirm.

Select LIMIT ACTIVE.

Confirm selection.

LIMIT ACTIVE is activated
LIMIT ACTIVE is deactivated

Select BACK.

Confirm selection.

Sub-menu MPH-LIMIT is displayed.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands