Porsche Turbo 2007 Driver Manual Download Page 321

Page: 321 / 347

320

Tyre Pressure and Technical Data

Vehicle identification data

When ordering spare parts or making inquiries,

please always quote the vehicle identification

number.

Data bank

The vehicle data bank can be found on the left

under the loadspace floor.

It contains all important data about your vehicle.

Note

The data bank cannot be re-ordered if it is lost or

damaged.

Vehicle identification number

The vehicle identification number is under the

loadspace floor on the right in front of the tool kit

and at the bottom left behind the windscreen.

Identification plate

The identification plate is fitted on the firewall on

the right of the engine compartment.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands