Porsche Turbo 2007 Driver Manual Download Page 88

Page: 88 / 347

Windows and Sliding Roofs

- Close Panorama roof system completely

- Open sliding roof element

- Open Panorama roof system completely

- Lift sliding/lifting roof element

- Open sliding/lifting roof element

Note on operation

Using the automated presetting system, every

usable roof position can be controlled directly with

the rotary switch.

Always keep the Panorama roof system and

the side windows closed while driving off-road.

Warning!

Risk of injury when operating or automati-

cally closing the Panorama roof system.

Take care to ensure that nobody can be injured

when the Panorama roof system is operated.

Always withdraw ignition key when leaving the

vehicle or switch ignition off in vehicles that

have Porsche Entry & Drive. Always take the

ignition key with you when leaving the vehicle.

Uninformed persons (e.g. children) could injure

themselves by operating the Panorama roof

system.

In case of danger, operate the rotary switch in

the opposite direction or release the vehicle

key immediately.

A – Closing Panorama roof system

completely

Turn rotary switch to position

B – Opening sliding roof element

completely

Turn rotary switch to position

Roof element 2

is opened completely.

The roller blind opens automatically to the

selected opening width.

C – Opening Panorama roof system

completely

Turn rotary switch beyond stop position

switch position

Roof elements 2 and 3

are opened

completely.

The roller blind opens automatically to the

selected opening width.

D – Lifting sliding/lifting roof element

Turn rotary switch to position

Roof element 3

is lifted completely. The roller

blind does not change its position here.

E – Opening sliding/lifting roof element

completely

Turn rotary switch to position

Roof element 3

is opened completely.

The roller blind opens automatically to the

selected opening width.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands