Porsche Turbo 2007 Driver Manual Download Page 102

Page: 102 / 347

Lights, Direction Indicators and Windscreen Wipers

101

Windscreen wiper/washer stalk

Caution!

Danger of injury when the windscreen wipers

operate unintentionally.

Risk of damage to the engine compartment

lid, windscreen and wiper system.

Only wipe the windscreen when sufficiently

wet, otherwise it could be scratched.

Loosen frozen wiper blades before driving off.

Do not operate headlight washer when it is

frozen.

Always switch off windscreen wipers in car

washes to prevent them wiping unintentionally

(rain sensor operation).

Do not operate headlight washer in car

washes.

Always switch off windscreen wipers before

cleaning the windscreen to avoid unintentional

operation (rain sensor operation).

Always hold the wiper arm securely when

replacing the wiper blade.

Always switch off windscreen wipers before

opening the engine compartment lid (wiper

switch in position

). If the wiper arms are not

in their final position, they will automatically

move to this position when the engine

compartment lid is opened, even if the ignition

is switched off.

The wiper arms remain in this position until the

lid is closed and the wiper system is switched

off and then on again.

0 – Windscreen wipers off

1 – Rain sensor operation, front windscreen

wipers

Move wiper stalk upwards to the first click.

Notes on operation

The amount of precipitation on the windscreen is

measured. Wiper speed is automatically adjusted

accordingly.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands