Porsche Turbo 2007 Driver Manual Download Page 263

Page: 263 / 347

262

Minor Repairs

Maintenance note

Tyre repairs are not permissible under any circum-

stances.

After driving off-road, examine tyres for signs

of damage such as cuts, tears, bulges or

foreign objects stuck in the tread and replace

if necessary.

Kerbs

Heavy or sharp-angled impacts against kerbs or

sharp-edged objects (e.g. stones) can cause

hidden tyre damage that only shows up later.

Depending on the strength of the impact, the rim

flange may also be damaged.

Storage of wheels

Always store wheels in cool, dry, dark condi-

tions. Tyres without wheels should be stored in

a standing position.

Avoid contact with petrol, oil and grease.

In no case should tyres be more than 6 years

old.

The idea that tyres become more wear-resistant

with storage and age has no foundation.

Chemical additives that make the rubber elastic

lose their effect in the course of time and the

rubber becomes brittle.

The age of a tyre can be seen from the DOT code

on the tyre sidewall.

If, for example, the last four digits are 1206, this

means: the tyre was manufactured in the twelfth

week of 2006.

Tread

The less tread, the greater the danger of

aquaplaning.

For safety reasons, replace the tyres

before

the wear indicators appear (webs in the tyre

grooves, 1.6 mm high).

Check tyre tread regularly, particularly before

and after long journeys.

Wheel balancing

As a precaution, have wheels with summer

tyres balanced in the spring, and those with

mud and snow tyres before winter.

Only specified weights may be used for wheel

balancing.

Self-adhesive weights must not come into contact

with cleaning agents, since they could drop off.

Changing a wheel

When wheels are removed, mark the direction

of rotation and position of each wheel.

Example:

FR (front right), FL, RR and RL.

Always fit the wheels in accordance with their

marking.

Wheel alignment

Uneven tread wear indicates incorrect wheel align-

ment. The vehicle should be checked if this should

be the case.

Consult a qualified specialist workshop. We

recommend that you use a Porsche partner for

this work since these are staffed with trained

personnel and have the necessary parts and

tools.

Warning!

Risk of accident. You can lose control of the

vehicle.

If, during a journey, uneven running or vibra-

tions occur that could be caused by damage

to tyres or the car:

Reduce speed immediately, but without

braking sharply.

Stop the vehicle and check the tyres.

If no cause for the fault can be found, drive

carefully to the nearest qualified specialist

workshop.

We recommend that you use a Porsche

partner for this work since these are staffed

with trained personnel and have the necessary

parts and tools.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands