Porsche Turbo 2007 Driver Manual Download Page 62

Page: 62 / 347

Air Conditioning, Parking Heater and Rear Window Heating

Automatic mode

Press button

The indicator light in the button lights up.

Air quantity and distribution are automatically

controlled and variations are compensated.

Note on operation

If necessary, the automatic system can be

manually influenced.

This manual setting is retained until the appro-

priate function key is pressed again or the button

is pressed.

Sensors

To avoid affecting the performance of the air-

conditioning system:

Do not cover the sun sensor on the dashboard

and the temperature sensor

in the front

control panel of the air-conditioning system.

Setting temperature

To suit personal comfort, the interior temperature

can be adjusted between 16 °C and 29.5 °C.

Recommendation: 22 °C

The selected temperature is shown on the display

above the button.

Increasing temperature

Press button for temperature up.

Left side of vehicle: button

Right side of vehicle: button

Reducing temperature

Press button for temperature down.

Left side of vehicle: button

Right side of vehicle: button

If “LO” or “HI” appears on the display, the system

is operating at maximum cooling or heating

power. Automatic mode is switched off.
If the preselected temperature is changed, the air

quantity blowing out can adjust automatically in

automatic mode.

The desired temperature is reached more quickly

this way.

The selected air quantity is shown in a bar display

on the display above the button. The more bars

that are displayed, the more air flows into the

interior.

Increasing air quantity

Press button for air quantity

up.

Reducing air quantity

Press button for air quantity

down.

Press button

to return to automatic

mode.
If the air quantity was reduced so much that “OFF”

appears on the display, the supply of air from the

outside is interrupted.

Warning!

Risk of accident due to hampered vision.

The windows may mist up in the air quantity

setting “OFF”.

Press button

up (increase air quantity).

Setting air quantity

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands