Porsche Turbo 2007 Driver Manual Download

Page: 158 / 347

Driving and Driving Safety

157

Tiptronic S

The Porsche Tiptronic is a six-speed transmission

and features an “automatic” and a “manual”

gearshift mode.
In

automatic selection mode

(selector lever

position

), gear changing is automatic.

You can change temporarily from automatic to

manual mode using the rocker switches on the

steering wheel. depending on the driving

programme.
In

manual selection mode

(selector lever

position

), you change gear using the rocker

switches on the steering wheel or by pushing the

selector lever forward or back.
The functions of selector lever positions

and

differ in the High Range on-road driving

programme and the Low Range off-road driving

programme.
You can change between selector lever positions

and

as you wish while driving.

The currently selected gear is retained when you

change from

If you change from

, the gear-changing map

suitable for your current driving style is selected

and the appropriate gear is selected.

Note on operation

Take care not to operate the rocker switches on

the steering wheel inadvertently, thereby

triggering undesired gear changes.

Changing the selector lever position

The selector lever is locked when the ignition is

switched off.
The selector lever can be moved from position

and

only with:

– the ignition switched on,
– the brake pedal pressed and
– the release button pressed (

arrow

Release button

The release button (

arrow

) on the front side of the

selector lever prevents unintentional gear

changes.
The release button must be pressed when shifting

to position

The selector lever can no longer be operated in

the event of an electrical fault.

For information on emergency release of the

blocked selector lever:

Please observe the chapter “SELECTOR

LEVER EMERGENCY OPERATION” on

Page 162.

Starting

The engine can be started only in selector lever

position

with the brake pedal pressed.

Moving off

Select the desired position for moving off

(

) only when the engine is idling and

whilst depressing the brake pedal.

Since the vehicle creeps when in gear, do not

release the brake until you want to move off.

After selecting a gear, do not accelerate until

you can feel that the gear is engaged.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands