Porsche Turbo 2007 Driver Manual Download Page 308

Page: 308 / 347

Minor Repairs

307

Changing bulb for direction indicator

and side light

Cayenne, Cayenne S

Please observe the chapter “REMOVING

HEADLIGHTS” on Page 300.

1. Open bonnet.
2. Remove headlight.
3. Press release tab on the bulb housing in the

direction of the arrow and at the same time

push forward to the first detent

4. Press release tab

in direction of arrow again

and push forward. Using your other hand, pull

the bulb housing completely out of the front

apron.

Changing bulb for side light

Cayenne, Cayenne S

5. Pull bulb socket out of bulb housing.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands