Porsche Turbo 2007 Driver Manual Download Page 220

Page: 220 / 347

Trailer Hitch

219

Attaching ball hitch to the vehicle

When inserting ball hitch

, do not touch

handwheel

with your hand. When the ball hitch

locks into place, the handwheel rotates back

counter-clockwise and comes into contact with

the ball hitch again.
1. Insert tensioned ball head

into mounting

tube

in the

direction of the arrow

and push

it up firmly until the ball hitch snaps into place.

2. Turn key

counter-clockwise to lock the ball

hitch and then withdraw the key. Once the key

has been removed, it must not be possible to

pull the handwheel to the side.

3. Cover lock with cap

4. Store key in the tool box.

Safety check

You can use the following 4 points to check

whether the ball hitch was fitted properly.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands