Porsche Turbo 2007 Driver Manual Download Page 127

Page: 127 / 347

126

Multi-Purpose Display and Instruments

Setting spare wheel.

The spare wheel is not equipped with a wheel

transmitter and is not monitored by Tyre Pressure

Monitoring. The tyre pressure warning light lights

up on the speedometer when the ENTER button is

pressed. The value “_._” is displayed in the sub-

menu TYRE PRESSURE (filling information) at the

position of the spare wheel.
The reminder SPARE WHEEL/SEALING SET

OPERATION? appears each time the ignition is

switched on. For information on spare wheel/

sealing set operation: Please observe the chapter

“NOTE ON OPERATION FOR SPARE WHEEL/

SEALING SET OPERATION” on Page 127.

Note

The spare wheel must be used only over short

distances.

For information on handling and fitting/

removing the spare wheel: Please observe the

chapter “SPARE WHEEL” on Page 282.

Setting collapsible spare wheel.

The collapsible spare wheel is not equipped with

a wheel transmitter and is not monitored by

Tyre Pressure Monitoring. The tyre pressure

warning light lights up on the speedometer when

the ENTER button is pressed. The value “_._” is

displayed in the sub-menu TYRE PRESSURE

(filling information) at the position of the

collapsible spare wheel.
A warning appears on the multi-purpose display if

the speed limit of 80 km/h (50 mph) is exceeded.
The reminder SPARE WHEEL/SEALING SET

OPERATION? appears each time the ignition is

switched on.

For information on spare wheel/sealing set opera-

tion: Please observe the chapter “NOTE ON

OPERATION FOR SPARE WHEEL/SEALING SET

OPERATION” on Page 127.

MAIN MENU

> TYRE PRESS.

> SETTINGS

> TYRES

> SPARE WHEEL

Select and confirm.

Select SPARE WHEEL.

Confirm selection.

The display automatically returns to the

TYRE PRESSURE sub-menu (filling informa-

tion).

The required pressures can be read there.
Select BACK.

Confirm selection.

The basic display appears.

MAIN MENU

> TYRE PRESS.

> SETTINGS

> TYRES

> SPARE WHEEL

Select and confirm.

Select COLLAP. WHEEL.

Confirm selection.

The required pressure and speed limit for the

collapsible spare wheel are displayed.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands