Porsche Turbo 2007 Driver Manual Download

Page: 133 / 347

132

Multi-Purpose Display and Instruments

Option 3:

AUTO LOCK on and AUTO UNLOCK on

Doors lock automatically when a speed of

approx. 6 km/h (4 mph) is exceeded.
On vehicles

without

Porsche Entry & Drive, the

doors are unlocked automatically when the

ignition key is withdrawn.
On vehicles equipped

with

Porsche Entry & Drive,

the doors are unlocked when the ignition is

switched off twice.

Option 4:

AUTO LOCK off and AUTO UNLOCK on

The doors do not lock automatically.
If the doors are locked with the central locking

system button:
On vehicles

without

Porsche Entry & Drive, the

doors are unlocked automatically when the

ignition key is withdrawn.

On vehicles equipped

with

Porsche Entry & Drive,

the doors are unlocked when the ignition is

switched off twice.

Setting off delay

You can set the duration the lights remain on after

the vehicle is locked.

Setting the clock

Note on operation

There is also a button on the instrument panel to

call the CLOCK menu:

Please observe the chapter “C – CLOCK” on

Page 108.

MAIN MENU

> SETTINGS

> LIGHTS

Select and confirm.

Select OFF DELAY.

Confirm selection.

The set off delay time is now active.

Select the time input field.

Confirm selection.

Set the off delay time (Coming Home function):

The time is adjusted by pressing the rocker

switch.

Delay times of 15, 30 or 60 seconds can be

set.

Confirm selection.

MAIN MENU

> SETTINGS

> CLOCK

Select and confirm.

Select xx:xx SET.

Confirm selection.

Select hours or minutes display.

Confirm selection.

The desired time can now be set.

Set the desired time:

The time is adjusted in hour or minute

increments by pressing the rocker switch.

Confirm selection.

Selecting 12 h mode

Select 12 h MODE.

Confirm selection.

12 h MODE is activated
12 h MODE is deactivated

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands