Porsche Turbo 2007 Driver Manual Download

Page: 42 / 347

Seats, Mirrors and Steering Wheel

- Passenger airbag switched on (ON)

- Passenger airbag switched off (OFF)

Switching passenger airbag on and off

1. Remove cover
2. Using the vehicle key, switch the passenger

airbag off

or on

Danger!

Risk of serious or mortal injury for passenger

if passenger airbag remains switched off

after the child seat is removed.

The passenger airbag must be switched on

again once the child seat has been removed.

Warning light “PASSENGER AIRBAG OFF”

If the airbag is switched off on the passenger’s

side, the PASSENGER AIRBAG OFF

warning light

is continuously lit

when the ignition is switched on.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands