Porsche Turbo 2007 Driver Manual Download Page 199

Page: 199 / 347

198

Luggage Compartment, Loadspace and Storage

Inserting and adjusting tie-down rings

Tie-down straps or the luggage net can be

fastened to the tie-down rings.
Make sure that all rings are equally loaded when

securing a load.
The tie-down rings are not designed to restrain

loads in serious accidents.

1. Insert the tie-down ring in the opening

of the

mounting rail.

2. Press button

down and slide the tie-down

ring in the corresponding direction.

3. Release button

4. Check that the tie-down ring is locked in

position by pushing it.

5. Insert the remaining tie-down rings.

Note on operation

The opposing tie-down rings must always be

inserted in the opposite direction.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands