Porsche Turbo 2007 Driver Manual Download

Page: 227 / 347

226

Parking

- Front display – left monitoring area

- Front display – right monitoring area

Warning indicators, signal tones, distances

The warning indicator for the front area is located

on the dashboard.
The warning indicator for the rear area is located

in the roof lining at the rear of the vehicle.
The warning indicators for the respective

monitoring areas (left and right) are subdivided

into one green, 4 yellow and 2 red LED segments.

- Rear display – right monitoring area

- Rear display – left monitoring area

If ParkAssist is activated, the

green LED

segments

of the active warning indicators are lit

up continuously.
If the vehicle approaches an obstacle that has

been detected by the sensors, one or more of the

yellow or red LED segments lights up, depending

on the distance to the obstacle.

If the

first yellow LED segment

lights up, the

obstacle is still 120 cm (front) or 120 to 150 cm

(rear) away.

A brief signal tone sounds when reversing.
An

intermittent tone

sounds when the distance

becomes less than approx. 60 cm. The

fourth yellow LED segment

lights up.

If the distance becomes less than approx. 25 cm

(on vehicles with trailer coupling: approx. 35 cm),

continuous tone

sounds. The

second red LED

segment

lights up.

Set the radio volume so that the signal tones

are not drowned out.

You can have the volume of the signal tones

adjusted to your own requirements.

Consult a qualified specialist workshop. We

recommend that you use a Porsche partner for

this work since these are staffed with trained

personnel and have the necessary parts and

tools.

Note on operation

If the obstacle is approached even closer after the

continuous tone sounds and the second red LED

segment lights up, the system may not be able to

recognise the obstacle any longer.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands