Porsche Turbo 2007 Driver Manual Download Page 28

Page: 28 / 347

Seats, Mirrors and Steering Wheel

Front seats

Seat position

A correct sitting position is important for safe and

fatigue-free driving. We recommend the following

procedure for adjusting the driver’s seat to suit

individual requirements:
1. Adjust the seat height to give yourself enough

headroom and a good overview of the vehicle.

2. Adjust the seat in fore-and-aft direction until,

with the accelerator pedal fully depressed,

your leg is straight but your entire foot still

rests on the accelerator pedal.

3. Grip the top half of the steering wheel. Set the

backrest angle and the steering wheel position

so that your arms are almost outstretched.

However, your shoulders must still rest on the

backrest.

4. If necessary, correct the seat fore-and-aft

adjustment.

5. Adjust the height of the headrest so that the

upper edge is at eye level or higher.

Adjusting the seat

Warning!

Risk of accident. The seat may move further

than desired if you attempt to adjust it whilst

driving. You can lose control of the vehicle.

Do not adjust the seat whilst driving.

A Seat height adjustment at front.
B Seat height adjustment at rear.

C Fore and aft adjustment.
D Backrest angle adjustment.
E Lumbar support adjustment.

To permit a relaxed sitting posture, the

backrest curvature is continuously adjustable

in vertical and horizontal directions for

individual pelvis and spinal column support.

Press the switch in the direction indicated by

the

arrows

until the desired setting is reached.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands