Porsche Turbo 2007 Driver Manual Download Page 44

Page: 44 / 347

Seats, Mirrors and Steering Wheel

Installing a child seat with ISOFIX system

Markings for the Isofix child seat anchorage can

be found on the right and left on the backrest of

the passenger seat and on the backrests of the

outer rear seats.

The retaining lugs

for the Isofix child seat

anchorage can be found directly under the

markings between backrest and seat cushion.
1. Secure the child seat to retaining lugs

outlined in the instruction manual for the child

seat.

2. Pull the child seat to check that both fastening

points are engaged correctly.

Danger!

Risk of serious or mortal injury for passenger

if passenger airbag remains switched off

after the child seat is removed.

The passenger airbag must always be

switched off if child restraint systems are

installed on the passenger’s seat for children

weighing up to 27 kg.

For children weighing 27 kg or more, the

passenger airbag should be switched on.

The vehicle seat must be adjusted so that it is

in its rear position in this case.

To switch on the passenger airbag:

Please observe the chapter “SWITCHING

PASSENGER AIRBAG ON AND OFF” on

Page 41.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands