Porsche Turbo 2007 Driver Manual Download Page 101

Page: 101 / 347

100

Lights, Direction Indicators and Windscreen Wipers

Brief overview – windscreen wipers

This brief overview does not replace the informa-

tion provided in the chapter “Windscreen wiper/

washer stalk”.

In particular, warnings are not replaced by this

brief overview.

Windscreen wiper stalk

Rain sensor switch

What do I want to do?

What do I have to do?

Wipe automatically at front

(rain sensor)

Press the stalk to detent position

Adjust rain sensor

Adjust rotary switch

in the stalk upwards (wipe more often) or downwards (wipe less often).

Wipe at front

Slow: Move the stalk to detent position

Fast: Move the stalk to detent position

Once: Briefly press stalk to position

Spray and wipe at front

Pull stalk to position

and hold.

Wipe at rear

Normal: Press stalk to position

Once: Briefly move stalk to position

Spray and wipe at rear

Keep stalk pressed in position

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands