Porsche Turbo 2007 Driver Manual Download Page 311

Page: 311 / 347

310

Minor Repairs

Tail light

Removing tail light

As a result of the design, a relatively large amount

of effort is required to remove the tail light.

In case of doubt, please consult a qualified

specialist workshop.

We recommend that you use a Porsche partner

for this work since these are staffed with trained

personnel and have the necessary parts and

tools.

1. Switch ignition off.
2. Open rear lid.
3. Remove the two caps

with a screwdriver, for

example.

4. Unscrew the two fastening screws

with the

socket wrench from the tool kit.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands