Porsche Turbo 2007 Driver Manual Download Page 194

Page: 194 / 347

Luggage Compartment, Loadspace and Storage

193

5. Pull release lever

and fold the backrest

forward.

Cayenne, Cayenne S rear seat system

6. Cayenne, Cayenne S:

Insert support bracket of the backrest into the

support hook on the seat cushion (

arrow

Cayenne GTS rear seat system

6. Cayenne GTS:

Insert support bracket of the backrest into the

lug on the seat cushion (

arrow

Caution!

Risk of damage to the seat cover if the

support bracket of the backrest does not

latch into the lug on the seat cushion.

Insert support bracket into the lug.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands