Porsche Turbo 2007 Driver Manual Download Page 198

Page: 198 / 347

Luggage Compartment, Loadspace and Storage

197

3. Insert the two end elements of the strap reel in

the openings

of the mounting rails.

4. Press both end elements down and push

against the load.

5. Release the end elements.
6. Check that the elements are locked in position

by pushing against them.

7. Press button

and tension the strap so that

the load cannot move.

8. Release button

Inserting strap reel on one rail

1. Press button

on the end element and pull

both elements apart slightly.

2. Insert one end element of the strap reel in the

opening

of a mounting rail, press down and

slide into position.

3. Insert the second element in the same

opening

, press down and slide in the

opposite direction.

4. Check that the elements are locked in position

by pushing against them.

5. Press button

and place the strap around the

item of luggage.

Tension the belt so that the item of luggage

cannot move.

6. Release button

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands