Porsche Turbo 2007 Driver Manual Download

Page: 247 / 347

246

Maintenance and Car Care

Periodically clean the wiper blades with a

window cleaner, especially after the vehicle

has been washed in a car wash.

We recommend the Porsche window cleaner.

If they are very dirty (e.g. with insect remains),

they can be cleaned with a sponge or cloth.

If the wiper blades rub or squeak, this may be due

to the following:
– If the vehicle is washed in an automatic car

wash, wax residues may adhere to the

windscreen. This wax residue can only be

removed by using a concentrated window

cleaner.

Please observe the chapter “ADDING WASHER

FLUID” on Page 243.

Please contact your Porsche partner for further

information.
– The wiper blades may be damaged or worn.

Replace damaged wiper blades as soon as

possible.

Replacing windscreen wiper blades

Apply the parking brake.

Switch the wipers off (wiper switch in

position

Switch ignition off.

1. Fold windscreen wiper arm away from the

windscreen (

arrow 1

2. Turn wiper blade at right angles (

arrow 2

) so

that the fixing groove of the wiper blade is

released by the retaining clip

3. Pull off wiper blade towards the windscreen

(

arrow 3

4. Push on new wiper blade.

Make sure that the wiper blade is pushed onto

the wiper arm up to the stop.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands