Porsche Turbo 2007 Driver Manual Download Page 70

Page: 70 / 347

Air Conditioning, Parking Heater and Rear Window Heating

Disabling control panel for rear

air-conditioned areas

The power windows and central locking buttons on

the rear doors and the rear control panel for the

air conditioning can be disabled by means of the

safety button in the armrest of the driver’s door.

Press the safety button to switch child

protection on and off.

The symbol in the safety button lights up if

child protection is active.

Press button

The symbol appears on the display.

The rear air-conditioned areas can be

controlled from the front control panel.

Ending the function

Press button

again.

Note on operation

The function is ended automatically

10 seconds after the last settings are made.

Rear seat heating

The rear seats can also be heated in vehicles with

four-zone air conditioning.

For further information on operating the seat

heating:

Please observe the chapter “REAR SEAT

HEATING IN VEHICLES WITH FOUR-ZONE AIR

CONDITIONING” on Page 33.

- Continuous opening and closing

- Setting vent direction

Vents

Rotate thumb wheel

upward.

Rotate thumb wheel

downward.

Switching child protection on/off

Controlling rear air-conditioned

areas with the front control panel

Opening vents

Closing vents

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands