Porsche Turbo 2007 Driver Manual Download Page 213

Page: 213 / 347

212

Luggage Compartment, Loadspace and Storage

Ashtray, rear

Depending on the vehicle equipment, an ashtray

may be installed in the rear door panels.

Opening

Press ashtray lid briefly.

Emptying

Open ashtray lid and press carefully towards

the door panel.

The insert is raised slightly.

Remove insert and empty.

Cigarette lighter

Warning!

Risk of fire and burning.

Do not leave children in the vehicle unattended.

Only hold the heated lighter by the knob.

The cigarette lighter is ready for use regardless of

the ignition lock position.

Using the front cigarette lighter

Press ashtray lid briefly. Ashtray opens

independently.

Press lighter into the receptacle. When the

element is red hot the lighter jumps back to its

initial position.

Using the rear cigarette lighter

Press lighter into the receptacle (

arrow

). When

the element is red hot the lighter jumps back

to its initial position.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands