Porsche Turbo 2007 Driver Manual Download

Page: 104 / 347

Lights, Direction Indicators and Windscreen Wipers

103

5 – Front windscreen wiper and washer

system

Pull wiper stalk towards the steering wheel.

The washer system sprays and wipes while the

stalk is pulled towards the steering wheel.

When the wiper stalk is released, a few

additional wipes are performed.

Headlight washer

(on vehicles with Bi-Xenon headlights):

The washer sprays only when dipped beam or

high beam is switched on.

To activate the headlight washer system, the

wiper stalk must be pulled for longer.

However, the headlight washer can be

activated again at the earliest after five

windscreen washing cycles.

The spray duration is limited.

Maintenance notes

If heavily soiled, repeat wash.

Persistent dirt (e.g. insect remains) should be

removed regularly.

For further information on vehicle care: Please

observe the chapter “CAR CARE INSTRUC-

TIONS” on Page 251.

The

front windscreen washer nozzles

are

heated when the ignition is on, as a precaution

against freezing. However, this does not replace

the use of antifreeze.

6 – Rear window wiper – intermittent

operation

Move wiper lever forward to the first click.

The rear window wiper wipes at preset inter-

vals.

7 – One-touch operation of rear window

wiper

Briefly press wiper stalk forward. The washer

system sprays and the rear window wiper

performs three wiping cycles.

Rear window wiper and washer system

Press wiper stalk forwards as far as it will go.

The washer system sprays and wipes as long

as the stalk is pressed away from the steering

wheel. When the wiper stalk is released, a few

drying wipes are performed.

Maintenance note

Periodically clean the wiper blades with a

window cleaner, especially after the vehicle

has been washed in a car wash.

We recommend the Porsche window cleaner. If

they are very dirty (e.g. with insect remains),

they can be cleaned with a sponge or cloth.

If the wiper blades rub or squeak, this may be due

to the following:
– If the vehicle is washed in an automatic car

wash, wax residues may adhere to the

windscreen. This wax residue can only be

removed by using a concentrated window

cleaner.

Please observe the chapter “ADDING WASHER

FLUID” on Page 243.

Please contact your Porsche partner for further

information.
– The wiper blades may be damaged or worn.

Replace damaged wiper blades as soon as

possible.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands