Porsche Turbo 2007 Driver Manual Download Page 280

Page: 280 / 347

Minor Repairs

279

Warning!

Risk of accident.

The collapsible spare wheel must be used only

over short distances in cases of emergency.

For safety reasons, replace the tyres

before

the wear indicators appear (webs in the tyre

grooves, 1.6 mm high).

Never deactivate the Porsche Stability

Management (PSM) system.

Avoid hard acceleration and high cornering

speeds.

The maximum permitted speed is

80 km/h

(50 mph)

and must not be exceeded because

of altered driving characteristics and for

reasons of wear.

Do not use a collapsible spare wheel from a

different vehicle type.

Do not mount the collapsible spare wheel from

your vehicle on a different vehicle.

Only fit

one

collapsible spare wheel on the

vehicle at any time.

On vehicles with air suspension, use the tyre

filling connection only to inflate the collapsible

spare wheel.

After using the collapsible spare wheel

Release air by unscrewing the valve insert.

Notes on operation

The tyre will revert to its original shape only after

several hours. Only then can it be stowed in the

spare wheel recess in the luggage compartment.
There is a plastic sheet in the tool kit for storing

the damaged wheel.

Maintenance note

The collapsible spare wheel must be repaired only

by the manufacturer.

If there is a fault on the collapsible spare

wheel:

Consult a qualified specialist workshop. We

recommend that you use a Porsche partner for

this work since these are staffed with trained

personnel and have the necessary parts and

tools.

Inflating tyres on vehicles

without level control

The compressor with pressure tester is located in

the luggage compartment under the loadspace

floor.

Please follow the operating instructions on the

compressor.

1. Screw filler hose of the compressor onto the

tyre valve.

2. Remove cover

of the engine-compartment

cover.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands