Porsche Turbo 2007 Driver Manual Download Page 269

Page: 269 / 347

268

Minor Repairs

Note on operation

For information on removing the spacers:

Please observe the chapter “CHANGING A

WHEEL WITH REMOVAL OF 17 MM SPACERS”

on Page 276.

For information on fitting the spacers:

Please observe the chapter “FITTING THE

17 MM SPACERS” on Page 278.

Wheel bolts

Always clean the wheel bolts before fitting.

Maintenance notes

Wheel bolts must not be greased.

Replace damaged wheel bolts.

Only use genuine Porsche wheel bolts

assigned especially to this model or wheel

bolts of similar quality which have been

manufactured according Porsche specifica-

tions and product requirements.

Tightening torque

Tightening torque of wheel bolts:

160 Nm (118 ftlb.)

Security wheel bolts

The adapter (wrench socket) for the security

wheel bolts is in the tool kit.
To loosen or tighten the wheel bolt with anti-theft

protection, the adapter must be used between the

wheel bolt and the wheel bolt wrench.

When positioning the wrench socket, ensure

that it engages fully in the teeth of the wheel

bolt.

Notes on operation

On vehicles with 17 mm spacers on the rear axle,

the wheels are secured with steel nuts. There is no

anti-theft protection for the wheel nuts.
If the wheels have to be removed at the workshop,

please do not forget to hand over the socket for

the security wheel bolts along with the vehicle key.

Summary of Contents for Turbo 2007




























































































































































































































































































































































Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands

Porsche Turbo 2007, Driver Manual

Search results

Summary of Contents for Turbo 2007

Reviews:

Related manuals for Turbo 2007

Brands by name

Popular brands