Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 5 / 314

GENERAL INSTALLATION GUIDELINES
R5 – 03
R5 - 03.1 PLEASE READ THE FOLLOWING VERY CAREFULLY BEFORE INSTALLATION
1
IMPORTANT: Due to the wide variety, modularity and flexibility of our products, we found it necessary to publish
these general installation guidelines. These guidelines are intended for use by experienced playground equipment
installers and/or general contractors skilled in assembly and installation of playground equipment. As with any
project, general construction knowledge and professional judgment may be required. If any questions or concerns
arise during the installation or maintenance of your equipment, please contact the factory and ask to speak to a
customer service representative at 1-800-333-8519.
2
As an installer of Playcraft Playground Equipment you are responsible for understanding the recommendations for
surfacing and providing an appropriate impact attenuating safety surfacing material. The owner of the playground
equipment is responsible for maintaining an appropriate level of impact attenuating safety surfacing material under
and around all playground equipment.
3
ATTENTION INSTALLER: Upon completion of project, ensure that a copy of the Playground Equipment Manual and
Maintenance Kit with all of its contents has been given to the owner of this playground equipment as a product and
safety reference and as guidelines for preventative maintenance. Please make it clear to the owner that the
Playground Equipment Manual and Maintenance Kit are to be kept on hand at the playground site at all
times.
4
Read all instructions thoroughly before installation. Improperly assembled playground equipment can present a
serious safety hazard. An appropriate impact attenuating safety surfacing material is required under and around all
play structures and must be maintained.
5
In addition to the guidelines found in this manual, all equipment purchases shall include a minimum of (1) Top View
drawing and (1) Perspective View drawing specific to each piece of equipment. These views are enclosed in Section
R5-02 marked “Construction Drawings”.
R5 - 03.2 RECOMMENDED TOOLS:
You may need the following tools for installation:
Adjustable End Wrenches Hacksaw Metal File Shovel / Spade
Carpenter’s Level Hammer Post Hole Digger Tape Measure
Combination Wrenches Hex Wrenches Ratchet Set Wheelbarrow
Drill & Bits Impact Driver Rubber Mallet
Electric Extension Cord Liquid Thread Lock (LOCTITE®) Safety Glasses
R5 - 03.3 TIGHTENING TORQUE FOR HARDWARE (SCREWS, BOLTS AND NUTS)
Tighten all screws, bolts, and nuts snugly. After fasteners are snugly tightened, turn nuts and screws an additional one-half
turn. IMPORTANT: Set screws should be turned an additional full turn after snug tightening. Once equipment or
components are fully assembled, with hardware tightened/torqued, any excess threads (more than two) extending past the
nut should be cut off and filed smooth. Use liquid thread lock (such as LOCTITE® Threadlocker) with all threaded
hardware.
IMPORTANT: Liquid thread lock (prior to curing) helps to eliminate the common problem of “thread seizure” in stainless
steel hardware by serving as a lubricant during assembly.
R5 - 03.4 GENERAL INSTALLATION GUIDELINES
1 Before you begin, read completely through all instructions carefully.
2
Identify all structural components included with your order. Check parts against your packing slip located in the front
pocket of the Installation Manual.
3
Refer to Section R5 - 04 for safe playground layout as well as the top view(s) and/or site plan included with your
purchase for accurate information on equipment layout. Confirm that the equipment you purchased and its use zones
will fit in your site. Site layout is a critical part of overall installation. A clear level site is required for proper installation.
4
While referring to the footing diagram in Section R5 - 06 and top view(s) provided, identify each post location and
excavate each hole; one at a time as assembly progresses. When referring to the footing specifications included with
these instructions, adjustments must be made to compensate for depth/thickness requirements of the selected
impact attenuating safety surfacing material (i.e. wood chips vs. rubber matting).
IMPORTANT: If soil conditions are loose or unstable, larger diameter footings are required. Inquire with local contractors
for appropriate recommendations.
www.playcraftsystems.com For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
7/2/2018