Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 200 / 314

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
SPIRAL STEP CLIMBER R5
INSTALLATION INSTRUCTIONS
Rev E
12/19/2018
R5-1234
Page 3 of 4
SPIRAL STEP CLIMBER
3/8" Black Cap Nut
3/8" x 7/8" O.D.
Washer
3/8" x 7/8" O.D.
Washer
3/8" x 1-1/4"
Button Head Bolt
SPIRAL STEP
CLIMBER TREAD
Figure 1.1
SPIRAL STEP CLIMBER
3/8" x 5/8"
Barrel Nut
1/2" SAE Washer
3/8" x 1" O.D. Washer
3/8" x 3/4"
Button Head Bolt
TRANSITION WALL
Figure 1.2
Step 2
(Factory Assembled)
Attach Spiral Step Climber Treads to Spiral Step Climber
as shown in Figure 1.1. (See Note A)
Step 3
Attach Transition Wall. (See Note C)
Step 4
Place Spiral Step Climber into footing hole and
attach to Transition Wall as shown in Figure 1.2.
(See Note A)
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 6
Plumb and level entire component. Pour concrete
into footing hole. Allow at least 72 hours to cure
before using this equipment. (See Note B)
Step 7
Place required protective surfacing under and
around Spiral Step Climber. (See Note D)