Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 100 / 314

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
TWISTER SLIDE
INSTALLATION INSTRUCTIONS
Rev G
12/6/2021
1710
Page 5 of 5
TWISTER SLIDE SECTIONS:
Shall be constructed of UV-stabilized rotationally
molded linear low density polyethylene with an
average wall thickness of .250".
TWISTER SLIDE SUPPORT:
Shall be fabricated of 1.660" O.D. 11 gauge steel
tubing welded to a 3/16" formed and punched
steel plate and will have a multi-stage baked-on
powder coat finish.
SINGLE SLIDE LEG:
Shall be fabricated of 1.660" O.D. 11 gauge steel
tubing welded to a 10 gauge steel plate and will
have a multi-stage baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Step 8
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 9
Plumb and level entire component. Pour concrete
into footing holes. Allow at least 72 hours to cure
before using this equipment. (See Notes B and E)
Step 10
Place appropriate compliant protective surfacing
under and around Twister Slide. (See Note D)
Parts List
Specifications
TWISTER SLIDE ROTO
Part # DESCRIPTION QTY
DE-4339-ENT Twister Slide - Entry
Varies
DE-4339-EXT Twister Slide-Exit Varies
DE-4339-L* Twister Slide-Left Varies
DE-4339-R Twister Slide-Right Varies
DE-4339-S Twister Slide-Straight Varies
EACH ENTRY HARDWARE ASTM
Part # DESCRIPTION QTY
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103122-TR Bolt Button Head 3/8" x 2-3/4"
4
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick
12
9413002 Nut Lock 3/8"
4
EACH ENTRY HARDWARE CSA
Part # DESCRIPTION QTY
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103092-TR Bolt Button Head 3/8" x 2" 4
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick
12
9413002 Nut Lock 3/8"
4
EACH SECTION JOINT
Part # DESCRIPTION QTY
9103082-TR Bolt Button Head 3/8" x 1-3/4" 5
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick
5
EACH MID-SUPPORT
Part #
DESCRIPTION QTY
BE-4500 Sectional Slide Support Bracket #2
1
FS-1710-S Sectional Slide Support
1
9103052-TR Bolt Button Head 3/8" x 1"
2
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick
4
9413162-BLK Nut Lock 3/8" w/ Black Cap
2
EACH EXIT LEG
Part # DESCRIPTION QTY
FS-1701 Single Slide Leg 1
9123032 Bolt Hex 3/8" x 3/4" 4
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 4
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance