Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 138 / 314

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
SINGLE POST SWINGS
INSTALLATION INSTRUCTIONS
Rev O
7/31/2019
PC-2181
Page 11 of 11
8' SINGLE POST SWING POST:
Shall be fabricated using 5" O.D. 11 gauge
galvanized steel tubing. The 8' Single Post Swing
Post shall have a multi-stage baked-on powder
coat finish.
10' SINGLE POST SWING POST:
Shall be fabricated using 5" O.D. 7 gauge
galvanized steel tubing. The 10' Single Post
Swing Post shall have a multi-stage baked-on
powder coat finish.
SINGLE POST SWING TREE TOP POST:
Shall be fabricated using 5" O.D. 11 gauge
galvanized steel tubing. The Single Post Swing
Tree Top Post shall have a multi-stage baked-on
powder coat finish.
SINGLE POST SWING BEAM:
Shall be fabricated using 3.5" O.D. 11 gauge
galvanized steel tubing with welded 3/16" thick
steel hangers. The Single Post Swing Beam shall
have a multi-stage baked-on powder coat finish.
SINGLE POST SWING CASTING:
Shall be cast from a high-strength aluminum alloy.
The Single Post Swing Casting shall have a multi-
stage baked-on powder coat finish.
POST CAP:
Shall be precision die-cast from a high-strength
aluminum alloy. The Post Caps have a
multi-stage baked-on powder coat finish.
SWING CHAIN:
Shall be 7mm (1/4") PC Grade 30 chain with
a silver shield cold galvanized finish.
SWING SEATS:
Shall be molded from a UV-stabilized flexible
rubber compound with slash-proof, reinforced
metal inserts.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and
corrosion.
Specifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance