Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 271 / 314

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
SECTIONAL SPIRAL SLIDE ASSEMBLY
INSTALLATION INSTRUCTIONS
Rev B
5/19/2021
1706-S
Page 8 of 12
TWISTER
SUPPORT
3/8" x 1" Button
Head Bolt
3/8" x 1" O.D.
Washer
3/8" Black Cap
Nut
3/8" x 1" O.D.
Washer
FIGURE 8
EXIT SECTION
SINGLE SLIDE
LEG
3/8" x 1" O.D.
Washer
3/8" x 3/4" Hex
Bolt
Figure 1.7
Step 14
Place Slide Support in footing hole and attach to
Support Bracket as shown in Figure 7. (See Note A)
Step 15
Place Slide Leg in footing hole and attach to Exit
Section as shown in Figure 1.8. (See Note A)
Step 16
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 17
Plumb and level entire component. Pour concrete
into footing holes. Allow at least 72 hours to cure
before using this equipment. (See Note B)
Step 18
Place required protective surfacing under and around
Sectional Spiral Slide Assembly. (See Note E)