Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 18 / 314

IMPORTANT NOTES: Read First
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
DECK TO DECK ASSEMBLY
INSTALLATION INSTRUCTIONS
Rev I
7/15/2019
1100-2
Page 1 of 2
FIGURE 1
Deck to Deck Assembly
NOTE : R5 Square Deck to Square Deck
Assembly shown. Other configurations will
vary slightly, but does not affect assembly.
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) These instructions apply to (2) Decks of the same or different styles that are joined together at the same
level. See specific deck installation instructions for attaching each deck corner to mounting blocks on post
collars.
(C) If Play System has (2) Half Hex Decks 4-Post, (2) 5 Post 90" Decks, or a combination of the two connected
at the same level refer to 1100-3 installation instructions. These configurations use longer button head bolts.
(D) An appropriate energy absorbing safety surface is required under and around all playground equipment.
Loose fill protective surfacing is shown only as an example for the purpose of this assembly instruction. Other
surfacing material may vary in thickness and/or compression depths. See free publication - The Handbook for
Public Playground Safety, Publication #325 at www.cpsc.gov for the surfacing appropriate for the fall height of
the equipment or consult your surfacing supply representative.