Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 256 / 314

IMPORTANT NOTES: Read First
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
DOUBLE SLIDE
1702
Page 1 of 7
Rev E
7/18/2009
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Do not pour concrete until the equipment is completely assembled, leveled and plumbed. Concrete must be
allowed to cure completely before using the equipment (at least 72 hours).
(C) Refer to Installation Manual Section R5-1305 Double Sit Down Bar and R3.5-1305 Double Sit Down Panel.
(D) Exit height must be between 7" [180mm] and 15" [380mm] from finish grade for slides with an elevation
greater than 48". For slide elevations no greater than 48", the exit height shall be no greater than 11".
Exit region must also have a downward slope of 0 to 4°.
(E) Use appropriate compliant protective surfacing and adjust footing depths accordingly. See free publication -
The Handbook for Public Playground Safety, Publication #325 at www.CPSC.gov for the surfacing appropriate for
the fall height of the equipment or consult you surfacing supply representative.
60" Double Slide
FIGURE 1
NOTE: R5 60" Double Slide shown.
R3.5 may vary slightly, but does not
affect assembly instructions.
R5-1305 Double Sit-Down Bar or
Figure 1.1
See Installation Manual Sections
R3.5-1305 Double Sit Down Panel
Figures 1.3 and 1.4
Figure 1.2
See Footing Detail