Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 182 / 314

Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
VERTICAL LADDER
INSTALLATION INSTRUCTIONS
Rev E
4/4/2013
1210
Page 3 of 3
Place required protective surfacing under and around
Specifications
Fully tighten all fasteners according to the
Step 3
Parts List
Step 4
section of the Installation Manual.
Vertical Ladder. (See Note D)
Step 5
using this equipment. (See Note B)
footing holes. Allow at least 72 hours to cure before
(See Notes A & C)
"TIGHTENING TORQUE FOR HARDWARE"
Plumb and level entire component. Pour concrete into
Step 2
Attach Half Walls to Deck. Place Vertical Ladder into
footing holes and attach to deck as shown in Figure 1.1.
Part #
DESCRIPTION QTY.
Varies Vertical Ladder 1
9103062-TR Bolt Button Head 3/8" x 1-1/4" 2
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 4
9413002 Nut Lock 3/8" 2
Figure 1.1
VERTICAL LADDER:
Shall be fabricated using 1.315" O.D. 12 gauge steel
tubing with welded 1.315" O.D. 12 gauge steel rungs
and 1/4" thick steel mounting plate. The Vertical
Ladder shall have a multi-stage baked-on powder
coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Maintenance Manual.
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance
DECK
VERTICAL LADDER
3/8" x 1-1/4"
3/8" x 1" O.D.
Washer
Button Head Bolt
Washer
3/8" x 1" O.D.
3/8" Lock Nut