Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 78 / 314

4/ 26/ 2008 6: 40: 49 AM, Rachel
Maintenance
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Parts List - Deck Mount
-VARIES-
007007
007118
See Pg.
R5 - 11
9103052-TR
9103062-TR
9143062-TR
9333002
9345002
9413002
9443022-TR
Panel (HDPE)
Mounting Lug R5
Flat Panel Bracket
Socket Clamp Assy.
Bolt Button Head 3/8" x 1"
Bolt Button Head 3/8" x 1-1/4"
Shoulder Bolt 3/8" x 1-3/8"
Washer Flat 3/8" x 1" x .100 thick
Washer Flat 1/2" SAE
Nut Lock 3/8"
Nut Barrel 3/8" x 5/8" BH
PANEL:
Shall be fabricated using 3/4" High Density
Polyethylene hot-extruded plastic.
SOCKET CLAMPS:
Shall be two-part and precision die-cast from a high
strength aluminum alloy. The Socket Clamps have a
multi-stage baked-on powder coat finish.
MOUNTING LUGS:
Shall be precision die-cast from a high-strength
aluminum alloy. The Mounting Lugs have a
multi-stage baked-on powder coat finish.
FLAT PANEL BRACKET:
Shall be precision laser-cut from 3/16" sheet steel.
The Flat Panel Bracket has a multi-stage baked-on
powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Specifications
1
2
2
2
4
2
2
8
6
2
4
Installation
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
PANEL - TYPE 2 (HDPE)
R5 - 1602
H
Page 3 of 3
Parts List - Ground Mt.
-VARIES-
007007
See Pg.
R5 - 11
9143062-TR
9345002
Panel (HDPE)
Mounting Lug R5
Socket Clamp Assy.
Shoulder Bolt 3/8" x 1-3/8"
Washer Flat 1/2" SAE
1
4
4
4
4
Step 1.
Locate and mark the position of the Collars on the
Support Posts. Refer to Elevation View for Collar
locations. See Note C. See also Assembly Page R5
- 09 Collars for hardware type and orientation.
Step 2. - Deck Mount
Attach the Panel to the deck using the Flat Panel
Bracket. Refer to Figure 1 for hardware type and
orientation.
Step 3.
Attach the Panel to the Post Collars using the
Socket Clamps and Mounting Lugs. Refer to Figure
2 for hardware type and orientation. See also
Assembly Page R5-11 Socket Clamps for additional
hardware details.
Step 4.
Apply liquid thread lock and fully tighten all fasteners
according to the "TIGHTENING TORQUE FOR
HARDWARE" Section of the Installer's Manual. See
Note A.
Step 5.
Place appropriate compliant protective surfacing
under and around Ground Mounted Panels. See
Note D.