Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 129 / 314

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
SINGLE POST SWINGS
INSTALLATION INSTRUCTIONS
Rev O
7/31/2019
PC-2181
Page 2 of 11
(See Table)
X
26"
660mm
24" Min.
[610mm]
24" Min.
[610mm]
12" Min.
[305mm]
Belt Seat ADA & Bucket Seat Combo Bucket Seats
(Finish Grade)
32"
813mm
44"
1118mm
*
24"
610mm
(Finish Grade)
(Top of Soil)
Footing Pin
Blocking, see
Installers Manual
Concrete Footing
2b Stone, drain rock
Undisturbed Soil
Optional Filter Fabric over
Pea Gravel (for drainage)
LOOSE FILL SURFACING MATERIAL SHOWN:
9" compressed or 12" uncompressed depth.
Compressed depth shown. (See Note H)
Top of Surfacing Label
Step 1
Refer to Footing Layout and mark footing hole
locations. Dig Ø 24" footing holes. Refer to
Footing Detail for depth and details.
IMPORTANT: For areas with soft soil conditions,
larger footings may be required.
* Footing depth must be adjusted to compensate
for the depth/thickness requirements of selected
safety surfacing. See Section 06.1 of the
Installation Manual.
NOTE: Footing depths and chain lengths must be
adjusted to compensate for lower height installs.
Recommended Swing Seat Heights (See Notes D, E & F)
Footing Detail
Swing Beam Height
Finish Grade to Top of Beam
Description Part No. X (in.) X (mm)
8' Single Post Swing PC-2181 96 2429
10' Single Post Swing PC-2181-10 120 3048
Swing w/ Tree Top PC-2182 96 2429