Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 45 / 314

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
TRANSFER STATION
INSTALLATION INSTRUCTIONS
Rev Q
4/12/2012
1209
Page 6 of 7
FIGURE 7
For optional 4" and 5"
Step Deck heights,
use lower holes in Filler.
3/8" x 1-1/4"
Button Head Bolt
3/8" x 1" O.D.
Washer
3/8" Lock Nut
3/8" x 1" O.D.
Washer
FILLER
TRANSFER DECK
STEP DECK
STEP DECK LEG:
Shall be fabricated using 1.660" O.D. 11 gauge steel
tubing with welded 10 gauge steel mounting bracket.
The Step Deck Leg shall have a multi-stage baked-on
powder coat finish.
STEP RAILS:
Shall be fabricated using 1.315" O.D. 12 gauge steel
tubing with welded 1.660" O.D. 11 gauge steel leg. The
Step Rails shall have a multi-stage baked-on powder
coat finish.
TRANSFER STATION WALL:
Shall be fabricated using 1.315" O.D. 12 gauge steel
tubing with welded 1.660" O.D. 11 gauge steel leg and
1.029" O.D. 14 gauge steel rungs. The Transfer Station
Wall shall have a multi-stage baked-on powder coat
finish.
STEPS & DECKS:
Shall be fabricated using punched, formed and welded
14 gauge sheet steel. Steps and Decks shall be Play-
Tuff™ coated after fabrication.
SOCKET CLAMPS:
Shall be two-part and precision die-cast from a high
strength aluminum alloy. The Socket Clamps have a
multi-stage baked-on powder coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
Specifications
Step 11
Place Step Deck Legs into footing holes and
attach Filler to Transfer Deck and Step Deck
as shown in Figure 7. (See Note A)
Step 12
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 13
Plumb and level entire component. Pour
concrete into footing holes. Allow at least 72
hours to cure before using this equipment.
(See Note B)
Step 14
Place required protective surfacing under
and around Transfer Station. (See Note D)