Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 167 / 314

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
R5-1208
Page 4 of 7
Rev H
2/22/2022
RAMP R5
INSTALLATION INSTRUCTIONS
(X)
1/4" x 1-3/8"
Socket Head
Screw
MOUNTING
BLOCK TOP
MOUNTING
BLOCK
BOTTOM
3/8" x 2-1/2"
Shoulder Bolt
1/2" SAE
Washer
RAIL
1/2" SAE
Washer
3/8" x 2"
Barrel Nut
Figure 1.4
RAMP
RAIL
3/8" x 1-1/4"
Button Head Bolt
3/8" x 1" O.D.
Washer
3/8" x 1" O.D.
Washer
3/8" Lock Nut
Figure 1.5
Step 6
Attach Collars at heights shown in Elevation View.
(See Note A)
Step 7
Attach Rail to Post as shown in Figure 1.4.
(See Note A)
Step 8
Attach Rail to Ramp as shown in Figure 1.5.
(See Notes A & E)
Step 9
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 10
Plumb and level entire component. Pour concrete
into footing holes. Allow at least 72 hours to cure
before using this equipment. (See Note B)
Step 11
Place required protective surfacing under and
around Ramp R5. (See Note D)
RAMP LEG I.D. TABLE
Upper Deck Height Ramp Leg Length (X) Flat Ramp Leg Length (X)
12" 30" [761mm] 36" [914mm]
18" - 24" 42" [1066mm] 48" [1218mm]
30" - 36" 54" [1371mm] 60" [1520mm]
42" - 48" 66" [1675mm] 72" [1828mm]
54" - 60" 78" [1977mm] 84" [2133mm]
66" - 72" 90" [2285mm] 96" [2438mm]