Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 189 / 314

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
GRIP CLIMBER
INSTALLATION INSTRUCTIONS
Rev K
6/15/2021
1216
Page 4 of 5
GRIP CLIMB
WALL
GRIP RAMP
FOOT
3/8" x 1" O.D.
Washer
3/8" Lock Nut
3/8" x 1" O.D.
Washer
3/8" x 1-1/4"
Button Head Bolt
1/2" x 1-1/2"
Button Head
Bolt
1/2" x 1-3/8"
O.D. Washer
GRIP RAMP
BRACKET
GRIP
GRIP CLIMB
WALL
3/8" x 1" O.D.
Washer
3/8" x 1-1/4"
Button Head
Bolt
Step 5
Place Grip Ramp Feet into footing hole and attach
Grip Climb Wall to Grip Ramp Brackets as shown
in Figure 1.2. (See Note A)
Step 6
Locate Grips as desired and attach to Grip Climb
Wall as shown in Figure 4. (See Note A)
Step 7
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 8
Plumb and level entire component. Pour concrete
into footing hole. Allow at least 72 hours to cure
before using this equipment. (See Note B)
Step 9
Place appropriate compliant protective surfacing
under and around Grip Climber. (See Note D)
Step 4
Attach Grip Ramp Feet to Grip Climb Wall as shown in
Figure 3. (See Note A)
FIGURE 3
Figure 1.2
FIGURE 4