Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 290 / 314

For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
SHADE CANOPY SQUARE ROOF
INSTALLATION INSTRUCTIONS
Rev B
11/9/2012
18021
Page 5 of 6
"TIGHTENING TORQUE FOR HARDWARE"
Figure 1.4
Fully tighten all fasteners according to the
section of the Installation Manual.
Step 8
Remove 1/4" x 1-1/2" Button Head Bolt and 1/4"
Lock Nut From Canopy Jack Screw. Hook D-Rings
and Wire Cable over Cable Retainers. Secure to
Canopy Jack Screws as shown in Figure 1.4.
Step 9
Adjust Wire Cable overlap and Wire Clamp until
Canopy is taut and D-Rings are secure against
retainers. Slide Wire Cable around until Wire Cable
Clamp is hidden inside of Canopy.
Step 10
Evenly tighten Canopy Jack Screws to adjust
Canopy tension and maintain a uniform dimension
on all sides. (See Top View)
Step 11
D-Ring
WIRE
CABLE
Button Head Bolt
1/4" Lock Nut
CANOPY
1/4" x 1-1/2"
CANOPY JACK
SCREW WELDMENT
Washer
Head Bolt
3/8" x 3/4" Button
3/8" x 1" O.D.
CANOPY
Figure 1.3
Step 7
Attach Canopy to Rafter Hub as shown in Figure 1.3.
NOTE: Do not use liquid thread lock (such as Locktite®)
on 3/8" x 3/4" Button Head Bolt and Rafter Hub in this
step.