Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 244 / 314

IMPORTANT NOTES: Read First
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
CLUBHOUSE ASSEMBLY
INSTALLATION INSTRUCTIONS
Rev G
9/10/2021
1639
Page 1 of 8
Figure 1.1
See Installation Manual Sections
09 Collars and 11 Clamps
See Footing Detail
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Do not pour concrete until the equipment is completely assembled, leveled and plumbed. Concrete must be
allowed to cure completely before using the equipment (at least 72 hours).
(C) Refer to Installation Manual for 09 Collars and 11 Socket Clamps installation instructions.
(D) All gaps created (e.g. between panels, between panel and deck, between panel and roof, etc.) must be less
than 3-1/2" [89mm] or greater than 9" [229mm].
(E) Use appropriate compliant protective surfacing and adjust footing depths accordingly. See free publication -
The Handbook for Public Playground Safety, Publication #325 at www.CPSC.gov for the surfacing appropriate
for the fall height of the equipment or consult your surfacing supply representative.
NOTE : R5 Clubhouse Assembly shown.
Other configurations will vary slightly but
does not affect assembly.
FIGURE 1
Clubhouse Assembly