Playcraft Farm Sound Panel Insert R5, Installation Manual

Page: 225 / 314

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
R5-1500-180
Page 4 of 5
Rev E
12/20/2021
180° CRAWL TUBE R5
INSTALLATION INSTRUCTIONS
1/2" SAE
Washer
3/8" x 5/8"
Barrel Nut
CRAWL TUBE
ENTRAPMENT
BLOCKER
HORIZONTAL
OFFSET TUBE
PANEL
3/8" x 1" O.D.
Washer
3/8" x 1" Button
Head Bolt
FIGURE 3
HORIZONTAL
OFFSET TUBE
PANEL
3/8" x 1-1/2"
Button Head Bolt
3/8" x 1" O.D.
Washer
HORIZONTAL OFFSET
TUBE PANEL
90° CRAWL TUBE
3/8" x 1" O.D.
Washer
3/8" Black
Cap Nut
Figure 1.2
Step 6
Attach Crawl Tube Entrapment Blocker to Tube
Panels as shown in Figure 3. (See Note A)
Step 7
Place Tube Support into footing hole and
attach to Tube Sections. (See Notes B & C)
Step 8
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 9
Plumb and level entire component. Pour
concrete into footing hole. Allow at least 72
hours to cure before using this equipment.
(See Note B)
Step 10
Place required protective surfacing under and
around 180° Crawl Tube R5. (See Note D)
Step 5
Attach Crawl Tube sections to Tube Panels as shown
in Figure 1.2. (See Note A)