18 DESIGN
User’s manual
Planmeca Chairside CAD/CAM solution 85
18.1 Tooth libraries
On the
Design
tab, the Tooth Libraries view open by
default. You can change the tooth library selected earlier
in the
Setup
tab. This may be useful for finding a better
match with the actual anatomy. You can also resize/move
the preview tooth, change the anatomy levels, and/or
deactivate Autogenesis for this restoration.
The library thumbnails appear in the
Options
box below
the restoration. A green preview tooth display. The
selected library is highlighted in yellow.
18.1.1 Select a library
If desired, click another library to view the preview tooth.
Select the library with the closest anatomy.
18.1.2 Resize the library tooth
The preview tooth can be resized to aid in Autogenesis.
Hold down the ALT key and use the UP or DOWN arrows
to resize the preview tooth. It should be close in size to
the adjacent teeth.
18.1.3 Move the library tooth
The preview tooth can be moved to aid in Autogenesis.
Click and drag the tooth into closer alignment with the
adjacent teeth.
