17 MARGIN
User’s manual
Planmeca Chairside CAD/CAM solution 79
Add segments tool
Use the Add Segments tool to redraw a portion of the
margin.
1. Click the Add Segments button.
2. Start by clicking on a portion of the margin line that is
acceptable.
3. Then, click to add new points across the gap in the line.
A line traces where you click. To create a curve use
multiple clicks.
4. Click Add Segments.
The system redraws the margin and removes the
unacceptable section.
Repeat as needed.
17.1.2 Move margin tool
Use the Move Margin tool to drag and drop a section of
the margin into a new position.
1. Click the Move Margin button.
2. Position the pointer on the margin; click and hold down
the mouse button.
NOTE
You can change the tool’s area of influence by dragging
the yellow button to increase or decrease the size of the
ellipse.
3. Drag the margin onto the margin shelf and release the
mouse button.
The system automatically redraws the margin in the new
location.
4. Repeat as needed.
