28 MILLING UNIT
User’s manual
Planmeca Chairside CAD/CAM solution 137
28.5.3 Milling unit software version
1. To view the version of software being used on the milling
unit, select
Maintenance
from the Home screen.
2. From the Mill Options screen, select Support Console.
3. Select Configuration.
4. Select Versions.
The Model Number and Serial Numbers are on this
screen.
When placing a call for service or support, you may be
asked to provide the serial number, model number,
software version number, or similar identifying data. The
serial number and model number are located on the
Product Identification Labels, affixed to the rear of each
unit, see section 3 “SYMBOLS ON PRODUCT LABELS”
28.6 Job server
The job server can be left on overnight, but it should be
shut down and restarted every few days.
To turn on the job server press the Power button on the
front of the job server.
To turn off the job server press the Power button. The
power light will turn off shortly.
28.7 Pending jobs
The Pending Jobs list is the default screen.
1. Scroll the restoration by touching the up and down
arrows.
NOTE
Always wait until the lid lights turn green before making
any selections on the touch screen.
2. When the restoration is highlighted, touch Select.
3. The system opens the lid and prompts you to insert the
block that matches the material selected in the
Design
tab.
