13 SETUP
34 Planmeca Chairside CAD/CAM solution
User’s manual
6. Select shade for the restoration. (A1 selected in this
example)
The shade is shown on the Milling Unit instructions along
with the material and block size.
NOTE
You can change the tooth library on the
Design
tab. The
system offers block size options on the
Mill
tab. The
material can be changed on the Mill tab settings.
7. If setting up a bridge select all the teeth you want to use
for the bridge by clicking on the tooth numbers.
8. Select the correct restoration type (crown or pontic).
9. Link the restoration as a bridge by clicking the Link button
and clicking on the first and the last tooth of the bridge.
10.To proceed to scanning click the Scan tab button.
