PEUGEOT 308 Handbook Download Page 377

Page: 377 / 400

LIST

375

308_EN_CHAP10D_RD45_ED02_2013

Using the PEUGEOT CONNECT USB

Press LIST brieﬂ y to display the

previously selected classiﬁ cation.

Navigate through the list using the left/

right and up/down buttons.

Conﬁ rm the selection by pressing OK.

The lists available are Artist, Genre and Playlist (as deﬁ ned in

the Apple

player).

Selection and Navigation are described in steps 1 to 4 above.

Do not connect a hard disk or USB connection device other

than audio equipment to the USB port. This could damage your

installation.

Connecting an Apple

Connecting an Apple player via the USB port

Press one of these buttons to gain

access to the previous / next track on

the classiﬁ cation list currently being

played.

Press and hold one of the buttons for

fast forward or backward play.

Press one of these buttons to

gain access to the previous / next

Genre, Folder, Artist or Playlist on

the classiﬁ cation list currently being

played.

Press and hold LIST to display the

different classiﬁ cations.

Select by Folder / Artist / Genre / Playlist,

press OK to select the classiﬁ cation

required, then press OK again to conﬁ rm.

- by Folder: all folders containing audio

ﬁ les recognised on the peripheral

device.

- by Artist: all of the artist names

deﬁ ned in the ID3 Tags, classiﬁ ed in

alphabetical order.

- by Genre: all of the genres deﬁ ned in

the ID3 Tags.

- by Playlist: in accordance with the

playlists recorded on the USB device.

PEUGEOT CONNECT USB

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands