manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 93

91

3

Comfort

308_EN_CHAP03_CONFORT_ED02-2013

                 

Boot fi ttings (SW)  

1.

    

Boot lamp

2.

    

Rear

    

Rear

Rear seat

    

folding controls

3.

    

12 V accessory socket (120 W max)

4.

    

Removable storage boxes

     

 

Pull on the separations to unclip them. 

5.

    

Storage wells

     

 

where are stowed: 
   -   the  towing  eye, 
  -   the temporary puncture repair kit, 
  -   the spare wheel, depending on trim 

level, an option or standard.  

6.

    

Load space cover

     

Load space cover

Load space cover

 

(see  corresponding  section)   

7.  Towing eyes

   Extract the eyes one at a time then slide 

them into the oblong housing. 

   While pressing the button, move the eye to 

the desired position. 

   Observe the direction of fitting (rings to the 

outside  of  the  vehicle).    

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands