PEUGEOT 308 Handbook Download Page 293

Page: 293 / 400

291

308_EN_CHAP10B_DENON_ED02-2013

DENON EQUIPMENT

The new DENON Hi-Fi system in the PEUGEOT 308 is a tailored technological solution comprising 9 speakers and a digital ampliﬁ er.

The DENON technology offers efﬁ cient components providing high

performance:

- 4 ﬂ exible membrane tweeters with resonance chamber to minimise

audio distortion. 100% active at the front of the vehicle.

- 4 CosCone

woofers: a technology allowing a high level of sensitivity

and speaker cone travel, generating high bass performance despite a

very ﬂ at form.

- 1 sub-woofer with a 100W speaker installed under the boot ﬂ oor, without

affecting the load volume of the boot.

- 1 Class-D 8-way digital ampliﬁ er. Improved control of running noises.

2 audio distribution settings available to suit the number of occupants in

the vehicle (driver or passengers).

- "Digital Coloration" technology giving the engine a more sporty and

reﬁ ned sound.

Summary of Contents for 308

















































































































































































































































































































































































































Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands

PEUGEOT 308, Handbook

Search results

Summary of Contents for 308

Reviews:

Related manuals for 308

Brands by name

Popular brands