manualshive.com logo in svg

PEUGEOT 308, Handbook

Share
Download
PEUGEOT 308 Handbook Download Page 133

131

4

Driving

308_EN_CHAP04_CONDUITE_ED02-2013

  The system is reactivated automatically 
at every new engine start by the driver.   

  Reactivation 

  Press  the   

"ECO OFF"

  switch again. 

 The system is active again; this is confirmed 
by the switch warning lamp going off, 
accompanied by a message.  

  Operating  fault 

 In the event of a fault with the system, this 
warning lamp comes on continuously. 
 Have it checked by a PEUGEOT dealer or a 

qualified workshop. 

 In the event of a fault in STOP mode, the 
vehicle may stall. 
 All of the instrument panel warning lamps 
come on. 
 Depending on version, an alert message may 
also be displayed, asking you to place the gear 
lever in position  

N

  and put your foot on the 

brake pedal. 
 You must switch off the ignition, then start the 
engine  again.  

  Before doing anything under the 
bonnet, deactivate the Stop & Start 
system to avoid any risk of injury 
resulting from automatic operation of 
START  mode.  

 This system requires a 12 V battery with a 

special specification and technology (reference 
numbers available from PEUGEOT dealers). 
 Fitting a battery not listed by PEUGEOT 
introduces the risk of malfunction of the 
system. 
 For charging, use a 12 V charger and do not 
reverse the polarity. 

  Maintenance 

  The Stop & Start system makes use of 
advanced technology. For any work on 

the system go to a qualified workshop 
with the skills and equipment required, 

which a PEUGEOT dealer is able to 
provide.   

Summary of Contents for 308

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands